V Belts

Product Details:

All Agricultural Special V-Belts have to operate in the most adverse conditions and within strenuous environments. These belts have to face extreme weather conditions such as sultry hot summers, heavy monsoon rains & chilling winters. The products are even subject to external factors such as soil, dust, harvested crop based stay remains, etc. They can be utilized on Type A pulleys.

DURATUF Agricultural V-belts are :

• Ideal for high load applications

• Excellent wear and shock durability

• The belt has a long service life and thus the frequency of replacement can be minimised

• Has excellent flex shock resistance than normal V-belts

• Resistant to all the extremities encountered in agricultural applications

Specification

Dimensional particulars of DURATUF Agricultural special V-belts

 

DURATUF Agricultural Special V-Belt is used for:-

 

• Agricultural machinery

• General light duty industrial use

• Clutch drives

Features

Chloroprene Based Material

Our agricultural special V-belts are made of qualitative chloroprene material
Wide Working Temperature

The V-belts have an operating temperature of a maximum of +100 °C
Robust V-Belt Cover

Cover fabric of polyester / cotton mixture
Suitable Conductivity

Our belts have electrical conductivity that is suitable for ISO 1813
Global Tolerance Standards

The V-belts have tolerances according to international standards
Customized Cord

Cord made of high strength polyester/aramid depending on customer choice

Additional Information:

• Delivery Time: 2 Weeks
• Packaging Details: Cardboard Carton

Product Details:

A Banded V Belt is essentially two or more V-belts & it’s linked by a common backing. This common band aligns the belt quite perfectly within the clusters and it makes the belt far stronger. It even increases the V-belt’s durability because of uniform tension, increased rigidity and even improved alignment. It can eliminate whip, belt twist & even belt turnover. Its ideal for the drives where pulsability load is present. This belting doesn’t require special pulleys.

The major advantage of DURATUF Banded belts is that the belts are built to move as a single unit on a pulley, where as a multiple belt set up is likely to have slight tension differences amongst them, leading to loss of torque. Because of their banded construction, these belts tend to prevent rollover and reduce vibration tendencies.

 

The products are utilized for industrial as well as agricultural purposes. Their increased durability is crucial in heavy duty applications where extreme shock loads along with inconsistent load tension are common reasons of failure.

 

Dimensional particulars of DURATUF Banded belts – Band range- from 2 bands to 6 bands

Dimensional particulars of DURATUF Banded belts (NARROW V TYPE) – Band range- from 2 bands to 8 bands

 

URATUF Banded V-Belt is used for:-

 

• Rock crushers

• Agricultural equipment

• Wood chippers and

• Almost any pump in the Oil & Mud industry

Additional Information:

• Delivery Time: 2 Weeks
• Packaging Details: Cardboard Carton

Product Details:

All Classical V-Belts are known to have a full range of trapezoidal cross sections that engages in a V-shaped groove within a pulley for better traction & wedging. It’s a power transmitting component and is quite common in numerous items of machinery in the industrial & agricultural sectors. These belts are quite adaptable to a number of applications.

 

Duratuf Products foremost thrust is to confirm consistent quality for its Classical V-Belt products. Our company provides wide range of Classical V-Belt items as per the required standards. We are quite attuned to deliver all our valued customers with optimal services that not only care into their businesses but also for the industry at large.

 

Dimensional particulars of DURATUF Classical Section V-belts:

 

 

 

 

DURATUF Classical V-Belt is used for:-

 

• Industrial and Agricultural machinery - it acts as a transmission belt, connecting the V-belt pulleys and transmits the force from the engine to the ancillary components

Features
Trapezoidal Cross Sections

The belts have several trapezoidal cross sections depending on power rating
Special Rubber Impregnation

Bias-cut cover fabric is impregnated with special rubber that’s oil, heat & anti-static resistant
Low Elongation

Low elongation to bending fatigue derived by using tough polyester cord
Great Adaptability

Our classical V-belts are adaptable to various industrial and agricultural applications
Global Standard Design

The classical V-belts ensure to follow Indian & International quality standards

 

Additional Information:

• Delivery Time: 2 Weeks
• Packaging Details: Cardboard Carton

Product Details:

All Harvester Combine V-Belts are of two types namely WRAPPED as well as RAW EDGED COGGED type for usage within combine harvesters. This range even encompasses the Poly V-Belts.

 

DURATUF Harvester Combine belts are designed for superior performance under variable speed conditions. Its high tensile core allows exceedingly low elongation under the load, while chloroprene as insulation rubber and also chloroprene impregnated wrapping fabric empowered DURATUF Harvester Combine belt with significant friction characteristics along with good oil-resistance and anti-static properties.

Dimensional particulars of DURATUF HARVESTER COMBINE belts:

DURATUF Harvester Combine V-Belt is used for:-

 

• Reverse idler applications which is common in harvester combines

• Longitudinal flexibility and is suited for smaller pulley diameters & reverse idlers

Features

Reverse Idler Design

Designed especially for reverse idler applications, common in harvester combines
Smaller Pulley Suited

Longitudinal flexible, suited for smaller pulley diameters and reverse idlers
Rigid Nature

Lateral rigidity of belts prevent belt deformation
Working Temperature Range

-18° C to + 80° C for regular belts | -25° C to +100° C for special belts
Brilliantly Load Resistant

The belts exhibit excellent resistance to loads during operation
Wear Resistance

The belts offer resistance to bottom cracks, chipping, moisture, rot & mildew

Additional Information:

• Delivery Time: 2 Weeks
• Packaging Details: Cardboard Carton

Product Details:

The purpose of Hexagonal Double V-Belts is to transmit power from both the belts. These products are designed with a special tension cord for meeting dual power requirement along with multiple bends. Hexagonal belts provide amazing torque, strength, and even durability and are used on drives having one or more reverse bends such as lawn & garden equipment, mixers, crushers, mule drives, agitators, conveyors etc.

 

Duratuf Hexagonal (Double) V-Belts are available in AA, BB & CC cross-sections. The products are particularly designed for rigorous applications. Their hex design enables them for maintaining optimal sidewall contact, while staying flexible enough for those drives that need power transmission from both the sides of the belt. The design of our Hex belt provides proper cord support and full contact with the sheave-groove for equal load distribution, uniform abrasion resistance, and increased durability. Flexible cords are strongly enforced into the body of the double angled V--belt resulting in equal load distribution and the absorption of flex fatigue and bending stress without additional belt wear.

 

DURATUF Hex V-belt conforms to IS-11038 and RMA IP 21 Standards

Dimensional particulars of DURATUF Hexagonal (Double) V-belts:

 

 

 

 

DURATUF Hexagonal Double V-Belt is used for:-

 

Drives having one or more reverse bends such as lawn & garden equipment, mixers, crushers, mule drives, agitators, conveyors etc.

 

Features

Dual Classical Profiles

Hex V-belts have dual sided profiles & transmit power from both sides
Special Tension Cord

The cord meets dual power requirement along with multiple bends
High Tensile Strength

Our V-belts possess tensile strength at high levels & absorb bending stress too
High Flexibility

The V-belts are immensely flexible for the drives at belt’s both sides
Highly Resistant

Our V-belts exhibit abrasion as well as oil & heat resistance
Static Conductivity

Our V-belts exhibit optimal sidewall contact along with static conductivity

 

Additional Information:

• Delivery Time: 2 Weeks
• Packaging Details: Cardboard Carton

Product Details:

All High Power Narrow V-Belts are especially appropriate for drives that have high belt speeds. Such drives are utilized within agricultural & industrial machinery. Since these belts require up to fifty percent smaller pulley widths as compared to classical sections, it permits for a significant size decline in drives. Narrow V-Belts can replace industrial ones in most cases as most new drives nowadays utilize universal pulleys. Such replacement only leads to a longer service life in the belt system of the machinery concerned with better transmission efficiency.

DURATUF V-belt conforms to IS 2494 (Part-I) 1994, ISO 4184, RMA IP-22, BS 3790 (1981), RMA IP -22 & DIN 2215 (1975) and other International Standards of Specification
Dimensional particulars of DURATUF Narrow High Power Narrow V-belts:

DURATUF High Power Narrow V-Belt is used for:-

 

• Agricultural Machineries

• Industrial Machineries

Features

Higher Speed Capability

The capability to operate at a higher speed on drive - up to 40 m/sec
Better Work Life

Exceptional flex rate that ensure better service life
Multi-Strand Nature

Been designed as "Set Free" for allowing multi-strand drives
Energy Saving

Permitted space saving drive designs & lower energy consumption
Highly Resistant

Excellent oil & heat resistance and static conductivity
Longer Service Life

Our V-belts ensure longer work life & better transmission efficiency

Additional Information:

• Delivery Time: 2 Weeks
• Packaging Details: Cardboard Carton

Product Details:

All Poly V-Belts consist of multiple longitudinal ribs. These V-belts work as per the power transmission belting. The products are single continuous belts that are utilized for driving numerous peripheral devices within a drive. The devices may be a power steering pump, alternator, air conditioning compressor, water pump or air pump. These belts are the optimum solution towards the drive design problem that’s faced by today’s automobile engineers.

 

DURATUF Poly V-belts are designed with a greater contact surface area when compared to the normal V-belts. They convey the torque due to the contact of the belt rib flanks and pulley grooves. It has trapezoid faced ribs on a fibre reinforced rubber matrix of base and are available in PK, PJ and PL section / series.

 

 

Dimensional particulars of DURATUF POLY V-belts:

DURATUF Poly V-Belt is used for:-

• Working on serpentine drives & small pulley diameters

• Automotive engine, such as an alternator, power steering pump, water pump, air conditioning compressor, air pump, etc.

Features

Multiple Longitudinal Ribs

These V-belts exhibit longitudinal ribs in multiple patterns on their surface
Larger Contact Surface

The V-belts have a greater contact surface area than normal belts
Wear Resistant

High power transmission, good wear resistance & shock absorption
Excellent Tension

Control Low stretch, excellent behaviour under tension
Extremely flexible

Our V-belts possess a flexible nature while facing a drive’s peripheral devices
Long Work Life

The V-belts are oil & heat resistant and provide a long service life

Additional Information:

• Delivery Time: 2 Weeks
• Packaging Details: Cardboard Carton

Product Details:

All our Raw Edged Cogged V-Belts don’t have textile wrapping upon their outer surface. They are produced by slitting individual belts from rubber sleeves. DURATUF Raw Edge V-Belts have cut-surfaces upon both the working sides that deliver better resistance to heat dissipation & bending whenever utilizing its own transmission effectiveness. These belts exhibit improved transmission efficiency by utilizing exceptional rubber for the frictional force upon the side of the belt. The products emit lower noise levels and do not slip so easily. A definite amount of heat contractibility stabilizes the tension of the transmission system. It is most suitable for small pulleys and high speed working.

 

Use of high grade material go into manufacturing these belts. The effectiveness of RAW EDGE COGGED BELT is most evident where the pulley diameters are extremely small but the belt speed requirement is high for extra power transmission and the operating temperatures are much higher.

 

 

DURATUF V-belt conforms to IS 2494 (Part-I) 1994, ISO 4184, RMA IP-22, BS 3790 (1981) & DIN 2215 (1975) and other International Standards of Specification

Dimensional particulars of DURATUF Raw Edge Cogged V-belts

 

 

Additional Information:

• Delivery Time: 2 Weeks
• Packaging Details: Cardboard Carton

Product Details:

All Variable Speed V-Belts are of the Wrapped & Cogged type. They are also known by the name of Multi Speed belt and exhibit a different shape than the normal V-belts. Its top width is greater than its thickness. Such a difference in shape enables these belts a greater range of speed ratio than any standard belt.

DURATUF Variable Speed belts deliver the required speed & horsepower. They are flexible, prevent buckling at minimum diameter settings where the belt stresses are greatest. Its firm gripping action in the contact area provides positive traction for precise, immediate response. Together, they assure reliable, predictable transmission of maximum power over the drive’s full operating range. Their better performances confirm lesser downtime for belt maintenance & much more productivity for customers’ equipment.

 

Usually, cogged or notched on the underside of Variable Speed belts are specified for equipment which requires changes in driven speed during operation. Variable Speed belts are specified by top width, inner circumference and the required groove angle. The groove angle can be measured from the drive pulleys

Dimensional particulars of DURATUF Variable Speed Belts:

Additional Information:

• Delivery Time: 2 Weeks
• Packaging Details: Cardboard carton

Product Details:

All Wedge V-Belts are a consequence of a continuous thrust on higher transmissions with condensed space requirements by the manufacturers as well as users concerned. They are usually addressed just as Wedge Belts that can transmit higher power when compared to conventional belts with the same top width.

 

Duratuf Products is here to deliver Wedge Belts that are usually used due to the space savings obtained by using these belts. They are also known by the name of Narrow V-Belts.

DURATUF V-belt conforms to IS 2494 (Part-I) 1994, ISO 4184, RMA IP-22, BS 3790 (1981) & DIN 2215 (1975) and other International Standards of Specification

Dimensional particulars of DURATUF Narrow or WEDGE V-belts:

 

DURATUF Wedge V-Belt is used for:-

 

• Most of the industrial applications ranging from light duty application drive to heavy load applications such as crusher drives

Features

Higher Flexibility

Our V-belts are highly flexible by nature as they are space friendly
Optimum Temperature Range

The belts have a working temperature range of -18¿¿¿C to 70¿¿¿C
Narrower Face Width

Comparatively higher load handling capacity than traditional V-belt pulleys
Better Performance

Lesser deformation of belt cross-section with pulleys for better performance
Efficient Operational Ability

Our V-belts have the ability to operate at a much higher belt speed
Heat Resistant

Bias-cut cover fabric impregnated with special rubber that's oil, heat & anti-static resistant

Additional Information:

• Delivery Time: 2 weeks
• Packaging Details: Cardboard Carton