Duratuf Products Private Limited
Duratuf Products Private Limited
Kalighat, Kolkata, West Bengal
SEND SMS
SEND EMAIL

Rubber Hoses

Prominent & Leading Exporter from Kolkata, we offer sae 100 r3 rubber hoses, water suction & discharge hose light duty (is: 2482), water suction & discharge hose (heavy duty) (is: 3549), steam rubber hose (is: 10655), slurry rubber hose and sae 100 r6 rubber hoses.

SAE 100 R3 Rubber Hoses

SAE 100 R3 Rubber Hoses
  • SAE 100 R3 Rubber Hoses
Ask For Price
Product Price :Get Latest Price

Product Details:

Shock ProofYes
ConditionNew
ColorBlack
BrandDuratuf

AE 100 R3 Rubber Hoses are meant to deal with medium pressure oil and fuel lines along with suction and return hoses of hydraulic systems. These hydraulic hoses consist of two plies of plaited textile for protecting their inner tube just in case their outer cover is broken. SAE 100 R3 Rubber Hoses suppliers ensure that the inner tubes in these products are protected without any compromise.

DURATUF SAE 100 R3 Medium Pressure Hydraulic - Hose double braid is ideal for medium pressure fuel and oil lines and even return & suction hoses of hydraulic system.

Two plies of braided textile (rubber compound impregnated) protect the inner tube. The tube is the innermost lining of a hydraulic hose and comes in contact with the fluid being conveyed. The tube and fluid compatibility is most critical. The Tube of our SAE 100R3 hose is made of Nitrile Rubber which has superior oil resistant capability. It won’t react with water or petroleum based hydraulic fluid within an operating temperature of -40¿¿¿ to 100¿¿¿C

 

The cover of the above hose is that of Neoprene Rubber compound for ensuring the protection of reinforcement of the hose from environment, machines & even from the operators, who may unintentionally damage it. Often, vapour steam at high temperature is directly in contact with the outer rubber cover of the hose. Moreover, it often comes in contact with chemicals & oil as well. Neoprene rubber compound takes care of such state of affairs.

Request
Callback
Yes! I am Interested

Water Suction & Discharge Hose Light Duty (IS: 2482)

Water Suction & Discharge Hose Light Duty (IS: 2482)
  • Water Suction & Discharge Hose Light Duty (IS: 2482)
Ask For Price
Product Price :Get Latest Price

Industrial Water Suction & Discharge Rubber Hoses under the Light Duty category adhere to the IS 2482/90 Standard. These hoses are widely used for suction & delivery of water, free from muddy water & solids within agricultural and domestic works, dam projects & even de-watering of general purpose.

DURATUF Type 1 Water Suction & Discharge Hoses consist of a rough bore.

 

 

Physical properties of Rubber Compound used in the lining, filler and cover of DURATUF Type 1 Rubber Water Suction & Discharge Hose:- 

DescriptionTensile StrengthElongation & break
Rubber Compound used in the lining, filler & cover5 MPa (Minimum)250% (Minimum)

Different sizes of DURATUF RUBBER WATER SUCTION AND DISCHARGE HOSE, LIGHT DUTY Conforming to IS: 2482:1990 Type 1

 

DURATUF Water Suction & Discharge Rubber Hoses are used for:-

 

  • General Construction Work

  • Irrigation Projects

  • Engineering Industries

  • Garages and Workshops

  • Shipyards

  • Numerous other applications for both Air & Water



Features:


Internal wire Helix

It is connected to nipple, if any by welding or brazing
Precise Ply Setting

Ply of impregnated woven textile applied on a bias at approx. 45° angle
Maintaining Quality Standards

It strictly adheres to the IS 2482/90 Standard
Porosity-Free Product

Filler of first-rate rubber compound, free from air blisters & porosity
Resistant Natural Compound

Synthetic/blend rubber compound lining for abrasion resistance
Qualitative Ply Usage

Ply / plies of rubberised textile fabric are used in our heavy duty hoses

 

Nominal Bore (mm)

Tolerance on NB (mm)

Min. Thickness of Lining (mm)

Min. Thickness of Cover (mm)

25.00

±1.25

1.5

1.50

31.50

±1.25

1.5

1.50

38.00

±1.50

1.5

1.50

45.00

±1.50

1.5

1.50

50.00

±1.50

2.0

1.50

56.00

±1.50

2.0

1.50

63.00

±1.50

2.0

1.50

75.00

±1.50

2.5

1.50

100.00

±2.00

2.5

1.50

125.00

±2.00

2.5

1.50

150.00

±2.00

2.5

1.50

 

Request
Callback
Yes! I am Interested

Water Suction & Discharge Hose (Heavy Duty) (IS: 3549)

Water Suction & Discharge Hose (Heavy Duty) (IS: 3549)
  • Water Suction & Discharge Hose (Heavy Duty) (IS: 3549)
Ask For Price
Product Price :Get Latest Price

Water Suction & Discharge Rubber Hoses under the Heavy Duty category adhere to the IS 3549:1983 Type 2 Standard. These hoses are meant for dewatering & delivery purposes during various conditions. The conditions can be de-flooding, handling for sewerage, mud and waste water at a maximum work pressure of 0.7, 1.0 & 1.5 MPa. Water Suction Hose manufacturers always ensure about these pressure parameters so that the items can function smoothly.

DURATUF Type 2 Water Suction & Discharge Hoses consist of a smooth bore. A crucial difference between suction hose & other types of hoses is the essentiality for ensuring that its walls don’t get collapsed. Moreover our each hose length has soft ends for clamping or can be supplied with built in nipple and flanges on request.

 

Physical properties of Rubber Compound used in the lining, filler and cover of DURATUF Type 2 Rubber Water Suction & Discharge Hose

Description
Tensile Strength
Elongation at break
Rubber Compound used in the lining, filler & cover
7 Mpa
300

 

Different sizes of DURATUF RUBBER WATER SUCTION AND DISCHARGE HOSE, HEAVY DUTY Conforming to IS: 3549:1983 Type 2

Nominal bore (mm)

Nominal bore Tolerance (mm)

Minimum Thickness of Lining (mm)

Minimum Thickness of Cover (mm)

Minimum Thickness of Filler (mm)

Length of Soft end

25.00

±1.25

2.00

1.50

1.00

85 ±5

31.50

±1.25

2.00

1.50

1.00

85 ±5

38.00

±1.50

2.00

1.50

1.00

85 ±5

45.00

±1.50

2.00

1.50

1.00

85 ±5

50.00

±1.50

2.50

1.50

1.00

85 ±5

56.00

±1.50

2.50

1.50

1.00

85 ±5

63.00

±1.50

2.50

1.50

1.00

85 ±5

75.00

±2.00

2.50

1.50

1.00

85 ±5

100.00

±2.00

3.00

1.50

1.50

105 ±5

125.00

±2.00

3.00

2.00

1.50

145 ±5

150.00

±2.00

3.00

2.00

1.50

145 ±5

200.00

±2.00

3.50

2.00

2.00

145 ±5

250.00

±3.00

3.50

2.00

2.00

145 ±5


Length of Soft Ends free from wire:

Nominal Bore (mm)

Length of Soft Ends

Up to & including 75mm

80±5

100mm

105±5

125mm-250mm

145±5


 

 

 

 

Request
Callback
Yes! I am Interested

Steam Rubber Hose (IS: 10655)

Steam Rubber Hose (IS: 10655)
  • Steam Rubber Hose (IS: 10655)
  • Steam Rubber Hose (IS: 10655)
Ask For Price
Product Price :Get Latest Price

Steam Rubber Hoses are utilized within several industries to transfer saturated steam at a specified pressure. These items designed by steam rubber hose manufacturers are meant to be reinforced with plies of rubber impregnated woven textile or braided steel wire or a combination of these two items. The rubber lining of these hoses has to be resistant to ageing by pressurised steam. More importantly the lining of our hoses is smooth, seamless, uniform in thickness and absolutely free from air blisters, porosity and splits. The cover component of our Steam Rubber hoses is either smooth or cloth marked finish, made up of appropriate rubber compound which is specially designed to resist against abrasion, heat, ozone and weather. Apart from these, the products can withstand extremely high temperatures and exhibit good flexibility.

 

DURATUF Hoses in the Steam Rubber class are available in Type 1, Type 2 and Type 3 categories and our customers can opt for any one of them from its service point of view. We can provide the hose products in wide range of bore sizes Bore sizes in accordance with IS: 10655/1999

 

 

Conforms to IS: 10655/1999

 

Available in the following types:

TYPE : 1

For W.P. : 0.5 MPa corresponding to a temperature 151¿¿¿C &

Minimum B.P. 5.0 MPa

TYPE: 2

For W.P. : 1.0 MPa corresponding to a temperature 184¿¿¿C &

Minimum B.P.: 10 MPa

TYPE: 3

For W.P. : 1.6 MPa corresponding to a temperature 204¿¿¿C &

Minimum B.P.: 16 MPa


Different Bore sizes of DURATUF RUBBER STEAM HOSE:

 

 

No. Bore (mm)

Tolerance on Nom. Bore size

Minimum Thickness of Lining (mm)

Minimum Thickness of cover (mm)

10.00

± 0.75

2.0

1.5

12.50

± 0.75

2.0

1.5

16.00

± 0.75

2.0

1.5

20.00

± 0.75

2.0

1.5

25.00

± 1.25

2.0

1.5

31.50

± 1.25

2.0

1.5

38.00

±1.50

2.0

1.5

45.00

±1.50

2.0

1.5

50.00

±1.50

2.0

1.5

63.00

±1.50

2.0

1.5

80.00

±2.00

2.0

1.5


DURATUF Steam Rubber Hoses are used in:-

 

  • Steel Mills

  • Thermal Plants

  • Chemical Plants

  • Fertilisers Plants

  • Pharmaceutical Industries

  • Heavy Engineering Industries

 

Request
Callback
Yes! I am Interested

Slurry Rubber Hose

Slurry Rubber Hose
  • Slurry Rubber Hose
Ask For Price
Product Price :Get Latest Price

Slurry Rubber Hoses are meant to be utilized for mud-slurry operations such as discharge and suction. These products are designed by slurry rubber hose suppliers with a corrugated cover for providing flexibility.

 

DURATUF SLURRY / MUD HOSE provides exceptional worthy service for suction of mud and slurry from the fields during irrigation.

 

 

  • Reinforcement is with combination of natural & synthetic fibre / galvanised steel wire applied by appropriate technique.


  • The inner lining / tube are designed from exceptionally high quality rubber compound made by blending natural and different variety of synthetic rubbers to ensure that it offers high resistance to abrasion and water absorption. It is smooth, seamless, uniform in thickness, reasonably concentric and free from air blisters, porosity and splits.


  • The outside cover of the hose has corrugated finish and is made from most suitable rubber compound, which is resistant to ozone, abrasion and weather and it is free from any visible defects, such as blisters, porosity and splits.

  • Available in I.D. – 3 inches to 22 inches

  • Vibration frequency: 08 to 12 cycles / sec

  • Service temperature range: -5¿¿¿C to 70¿¿¿C

  • Length: According to customer's requirement


DURATUF Slurry Rubber Hoses are used for:-

 

  • Suction of mud and slurry from the fields during irrigation




Features:
  Exceptional Flexibility

Our hoses are immensely flexible in nature to face muddy environments
Resistant To Chemicals

The hoses have appreciable chemical resistance property, including petroleum
Extremely Light Weight

The hoses are very much light to carry to place them in any field location
Total Leak Proofing

Our hoses do not leak due to their corrugated cover & robust surface design
Perfect Working Temperature

The hoses possess a perfect service temperature range of -5¿¿¿C to 70¿¿¿C

 

Request
Callback
Yes! I am Interested

SAE 100 R6 Rubber Hoses

SAE 100 R6 Rubber Hoses
  • SAE 100 R6 Rubber Hoses
Ask For Price
Product Price :Get Latest Price

SAE 100 R6 Rubber Hoses are manufactured through one-textile pleat construction to provide a large range of fluid compatibility. Various SAE 100 R6 Rubber Hoses suppliers ensure that these products possess a long service life.

DURATUF SAE 100 R6 textile braided hydraulic hoses are most suitable in low pressure conditions. Their black nitrile tube is quite compatible with petroleum base hydraulic fluids at a temperature range of -40o to 100°C. Neoprene cover protects their inside parts from degradation from weather, ozone, abrasion & oil. One braided high strength suitable synthetic yarn provides abundant flexibility to low pressure hydraulic hoses & suits narrow working spaces.


Nominal Bore Size, Working Pressure, Bursting pressure & Minimum Bend Radius

 

Nominal Bore Size (mm)

Hose I.D.

Hose O. D.

W.P. (MPa)

B.P. (MPa)

Min. Bend Radius (mm)

Min. (mm)

Max. (mm)

Min. (mm)

Max. (mm)

5.0

4.2

5.4

10.3

11.9

3.5

14.0

50

6.3

5.6

7.2

11.9

13.5

2.8

11.2

65

8.0

7.2

8.8

13.5

15.1

2.8

11.2

75

10.0

8.7

10.3

15.1

16.7

2.8

11.2

75

12.5

11.9

13.5

19.0

20.6

2.8

11.2

100

16.0

15.1

16.7

22.2

23.8

2.4

9.6

125

19.0

18.3

19.9

25.4

27.8

2.1

8.4

150

 

• Note: Bending radius measured on the inside of the bend

 

 

 

DURATUF SAE 100 R6 Rubber Hoses are used Low working pressure conditions including:-

  • Return and Suction lines

  • Power steering return hoses

  • Lube lines

  • Air lines without brake applications




Features

Perfect Working Temperature

Our hoses exhibit an Operating Temperature of -40⁰ to 100⁰C
High Flexibility

The hoses are immensely flexible for making low pressure hydraulic systems
Oil Resistant Nature

Our hoses display a High resistance towards Oil, Weather & Ozone
Impressive Pressure Management

The hoses can operate smoothly under Low Pressure
Impressive Outer Appearance

Our hoses exhibit a cool looking Black Nitrile tube
Easy Maintenance

The hoses can be operated in narrow work places easily

 

Request
Callback
Yes! I am Interested

Road & Rail Tanker Rubber Hose (IS: 10733)

Road & Rail Tanker Rubber Hose (IS: 10733)
  • Road & Rail Tanker Rubber Hose (IS: 10733)
Ask For Price
Product Price :Get Latest Price

Road and Rail Tanker Hoses are predominantly proposed for loading & off-loading of road & even rail tanker vehicles that carry Petroleum and blended products having an Aromatic Hydrocarbon content of 25% maximum. The products of many road tanker rubber hose manufacturers are coming in huge demand.

This product from DURATUF is available in 3 types – These are TYPE-1A & B, TYPE-2A & B and TYPE-3

The TYPE-1 and TYPE-2 Hoses are designed for Road and Rail Tanker services as DRY HOSES, which are drained after every period of service.

TYPE-3 is a smooth bore reeling hose which is without helical wire reinforcement. It’s used for continuous service and/or for duct that has higher aromatic content.

TYPE-1A: It has rough bore, with external & internal helical wire reinforcement, corrugated outer cover and for a Working Pressure of 0.35 MPa & a Minimum Bursting Pressure of 1.4 MPa.

TYPE-1B: It has a smooth bore, with embedded helical wire reinforcement plain or corrugated outer cover for a Working Pressure of 0.35 MPa and a Minimum Bursting Pressure of 1.4 MPa.

 

 

Different sizes of DURATUF ELECTRICALLY BONDED ROAD & RAIL TANKER RUBBER HOSE:

 

Nom. Bore in mm

Tolerance on Nom. Bore

Minimum Bending Radius in mm

Max. mass per meter of Hose for Type in Kg/m

For all Types

Type 1 A & 1 B

Type 2 A & 2B

Type 3

Type

1A

Type 1B

Type

2 A

Type 2 B

Type 3


Min. thk of Lining

(mm).

Min. thk of Cover

(mm).

25.0

± 1.25

-

-

190

-

-

-

-

1.28

2.00

1.25

31.5

± 1.50

130

190

230

1.05

1.35

1.80

1.95

1.65

2.00

1.25

38.00

± 1.50

155

230

280

1.35

1.65

2.10

2.40

1.88

2.00

1.25

50.00

± 1.50

205

305

360

1.88

2.25

2.78

3.00

2.25

2.00

1.25

63.00

± 1.50

255

380

-

2.25

3.00

3.68

4.13

-

2.00

1.25

75.00

± 2.50

305

460

-

3.00

3.75

5.00

5.25

-

2.00

1.25

100.00

± 3.00

410

560

-

4.13

4.80

6.75

8.25

-

2.00

1.25

 


 

 

Request
Callback
Yes! I am Interested

General Purpose Water Rubber Hose (IS: 444)

General Purpose Water Rubber Hose (IS: 444)
  • General Purpose Water Rubber Hose (IS: 444)
Ask For Price
Product Price :Get Latest Price

General Purpose Water Hoses in India are meant to deliver effective services across numerous applications. These are commonly used for water delivery purpose in Railways, Industries, dams, Mines, Horticulture, Irrigation, Fire Fighting, Construction Sites, Car Washing, De-watering etc.

They are provided with superior quality rubber inner lining which is smooth in bore and totally free from air blisters, porosity & splits

Maximum attention is given on the reinforcement of these hoses and it is provided with robust plies of rubber impregnated woven textile or braided superior strength natural/synthetic yarns. The cover finish of these hoses is available with smooth/fluted/cloth mark, totally free from air blisters, porosity and any other visible defects. Most importantly these are resistant to abrasion, ozone, oxidation and weather.

In our hose of this variety the minimum adhesion value between Lining and Reinforcement, between Cover and Reinforcement shall not be less than 1.5Kn/m

These are also available as per Standard specified in ISO/DIN etc.


Available in following types:

Type 1 W.P. of 0.60 MPa & min. B.P. of 1.90 MPa .

Type 2 W.P. of 1.0 MPa & min. B.P. of 3.15 MPa .

Type 3 A & B - W.P. of 2.5 MPa & min. B.P. of 8.00 MPa

Type -3 B has Oil Resistant Cover

 

DURATUF Hoses are available for the general purpose category at extremely reasonable prices but at top-notch product quality. Our customers can surely be very much satisfied after trying out our products from the hoses category

 

 

Different sizes of GENERAL PURPOSE WATER RUBBER HOSE available with DURATUF

 

Nom. Bore (mm)

Tolerance on Nom. Bore (mm)

Minimum Thickness of lining (mm)

Minimum Thickness of Cover for Type 1 & Type 2

Minimum Thickness of Cover for Type 3

10.00

± 0.75

1.50

1.0

1.50

12.50

± 0.75

1.50

1.0

1.50

16.00

± 0.75

1.50

1.0

1.50

20.00

+ 0.75 (-) 1.25

1.50

1.0

1.50

25.00

± 1.25

2.00

1.0

-

31.50

± 1.25

2.00

1.0

-

38.00

± 1.50

2.00

1.0

-

45.00

± 1.50

2.50

1.0

-

50.00

± 1.50

2.50

1.0

-

56.00

± 1.50

2.50

1.0

-

63.00

± 1.50

2.50

1.0

-

75.00

± 2.00

2.50

1.0

-

100.00

± 2.00

2.50

1.0

-

 

Tensile Strength and Elongation at break of Lining and Cover:

 

 

Hose Type

T.S.(minimum)

Elongation at break

( Min)

1

5.0 MPa

250%

2

5.0 MPa

250%

3

7.0 MPa

300%

 

Request
Callback


Additional Information:

  • Delivery Time: Standard Delivery
Yes! I am Interested

Chemical Rubber Hose (IS: 7654)

Chemical Rubber Hose (IS: 7654)
  • Chemical Rubber Hose (IS: 7654)
  • Chemical Rubber Hose (IS: 7654)
Ask For Price
Product Price :Get Latest Price
Chemical Rubber Hoses are meant to handle a wide range of acids, alkalis, aqueous solution of inorganic materials, and mineral acids during production & their transferring operations. Chemical Rubber Hose suppliers deliver these hoses by maintaining their product quality.

DURATUF Hoses are known to be designed with synthetic rubber tube. Their rubber cover is of synthetic material too that exhibits good resistance towards abrasion, heat and numerous chemicals. Its reinforcement member is made up of suitable material, depending upon usage

These hoses are available in two types:

 

Type : 1

Useful for conveying dilute chemicals

Type : 2

Useful for conveying concentrated chemicals

 

These are also available as per Standard specified in SAE/ISO/DIN etc.

 

 

Conforms to IS:7654:1968

Different Bore sizes of DURATUF RUBBER HOSE FOR CHEMICALS:

 

Nominal Bore (mm)

Tolerance on nominal bore size (mm)

10.00

±0.75

12.50

±0.75

16.00

±0.75

20.00

±0.75

25.00

±1.25

31.50

±1.25

38.00

±1.50

45.00

±1.50

50.00

±1.50

 

Request
Callback


Additional Information:

  • Delivery Time: Standard Delivery
Yes! I am Interested

Carbon Free Rubber Hose

Carbon Free Rubber Hose
  • Carbon Free Rubber Hose
Ask For Price
Product Price :Get Latest Price

Carbon Free Rubber Hoses are utilized to carry wires of electronic and electrical devices. These products provided by Carbon Free Rubber Hose suppliers exhibit good resistance towards electricity and heat due to the rubber compound that’s with or without an Asbestos cover.

 

DURATUF Carbon Free Hoses are mainly designed for services like carrying power cables within iron/steel mills, electrical furnaces, glass works and out fields where the hoses are needed to have good resistance towards radiation, heat, wades of hot metal, current leakage & exposure to high temperature.

 

 

DURATUF Carbon Free Rubber Hoses are used for:-

 

  • Electrical furnaces

  • Glass works

  • Iron & Steel Mills/Industries

  • Out Fields






Features

Robust Rubber Make

A tube which is made out of non-conductive rubber compound
Optimum Working Temperature

Operating temperature range of -5¿¿¿C to 70¿¿¿C (as DURATUF Carbon Free Hose)
Perfect Textile Fabric

Rubberized & woven textile fabrics of natural/synthetic variety used to reinforcing the tube
Electricity Resistant

Our Carbon Free Rubber Hoses can withstand electricity to a great extent
Resistant To Heat

The Carbon Free Rubber Hoses can even tolerate heat apart from electricity
Radiation Tolerance

Our Carbon Free Rubber Hoses can withstand radiation comfortably


 

Request
Callback
Yes! I am Interested

Air Rubber Hose (IS: 446)

Air Rubber Hose (IS: 446)
  • Air Rubber Hose (IS: 446)
  • Air Rubber Hose (IS: 446)
Ask For Price
Product Price :Get Latest Price

Air Rubber Hoses conform to the IS: 446/1987 Standard. These hoses have been utilized since the past many years as essential parts of industries that are used for delivering pressurized air right from the first stage of a diving regulator towards the other components.

Air Hose Pipe suppliers deliver products that are primarily made of top quality & durable natural/synthetic rubber compound. They also contain braided yarn rubber, both inside and out as reinforcement member. The air hose is well figured for its flexible property that endures very high and intense pressure with precisely no damage. Besides, it has an extremely smooth surface that makes it easy for rolling up for easy storage. Most importantly, these products work greatly with all sorts of pneumatic tools.

Our Air hoses comprise of 3 types - These are
Type 1 – For a W.P.: 0.7 MPa & Min B.P.: 2.8 MPa
Type 2 – For a W.P.: 1.0 MPa & Min B.P.: 4.0 MPa
Type 3 - For a W.P.: 1.4 MPa & Min B.P.: 5.6 MPa

 

These are also available as per Standard specified in ISO/DIN etc.

 


Our Air Hose nominal bore sizes:

Nominal

Bore

Tolerance

Minimum Thickness of Lining

Maximum thickness of cover

5mm

±0.75mm

1.5mm

Type 1

Type 2

Type 3

 

6.3mm

±0.75mm

1.5mm

1 mm

1 mm

1 mm

 

8 mm

±0.75mm

1.5mm

1 mm

1 mm

1 mm

 

10mm

±0.75mm

1.5mm

1 mm

1 mm

1 mm

 

12.5mm

±0.75mm

1.5mm

1 mm

1 mm

1 mm

 

16mm

±0.75mm

1.5mm

1 mm

1 mm

1 mm

 

20mm

±0.75mm

1.5mm

1 mm

1 mm

1 mm

 

25mm

±1.25mm

2.0mm

1 mm

1 mm

2 mm

 

31.5mm

±1.25mm

2.0mm

1 mm

1 mm

2 mm

 

38mm

±1.50mm

2.5mm

1 mm

1 mm

2 mm

 

50mm

±1.50mm

2.5mm

1 mm

1.50 mm

2 mm

 

 

Hose nominal bore up to 38mm may be mandrel or non-mandrel made. However bore above 38mm is always mandrel made.

Request
Callback
Yes! I am Interested

Cement Grouting Rubber Hose (IS: 5137)

Cement Grouting Rubber Hose (IS: 5137)
  • Cement Grouting Rubber Hose (IS: 5137)
Ask For Price
Product Price :Get Latest Price

Cement Grouting Rubber Hoses are meant to spray cement grout at construction sites such as bridges, dams & buildings, irrigation projects, and roads in hilly terrains. Manufacturers of cement grouting hose deliver products to carry concrete and moist sand. The hoses carry the construction mixture at immensely high pressure. They are designed for possessing the strength against damage & abrasion caused by the concrete and sand mix.

DURATUF Hoses that deal with cement grouting conform to the IS: 5137/1990 standards. Our grouting hoses contain a strand of copper wire which is inserted between the reinforcement plies for providing electrical continuity throughout the length of the hose.

These are also available as per Standard specified in ISO/DIN etc

 

 

Available in the following TYPES:

 

Type

Working Pressure (W.P.)

Bursting Pressure (B.P.)

Type: 1

0.7 MPa

3.5 MPa

Type: 2

1.0 MPa

5.0 MPa


Different Bore sizes of DURATUF CEMENT GROUTING HOSE:

 

No. Bore (mm)

Tolerance on Nom. Bore size

Minimum Thickness of Lining (mm)

Minimum Thickness of cover (mm)

25.0

± 1.25

6.3

1.5

31.5

± 1.25

6.3

1.5

38.0

± 1.50

6.3

1.5

50.0

± 1.50

6.3

1.5

63.0

± 1.50

6.3

1.5

75.0

± 2.00

6.3

1.5

DURATUF Cement Grouting Rubber Hoses are used for:-

 

  • Special purposes regarding suction & discharge of concrete slurry within drilling operations & placement of concrete in casting locations

  • Discharge of dry bulk material, concrete & dry cement at irrigation projects, building sites, dams, roads, bridges, etc.


Feature


Resistant To Abrasion

These hoses’ cover is abrasion resistant synthetic natural rubber compound
Uniformly Seamless Lining

They have an extra thick lining of highly abrasion resistant soft natural rubber
Braided Textile Reinforcement

They have braided/woven textile reinforcement of synthetic/natural textile fibre
Pressure Tolerance

Our cement grouting rubber hoses can withstand pressure at high levels
Damage Control Capability

The cement grouting rubber hoses is capable to withstand operational damage
Quality Assurance

Our cement grouting rubber hoses adhere to the IS: 5137/1990
Request
Callback
Yes! I am Interested

Oil Suction & Discharge Hose (IS: 8189)

Oil Suction & Discharge Hose (IS: 8189)
  • Oil Suction & Discharge Hose (IS: 8189)
Ask For Price
Product Price :Get Latest Price

Oil Suction & Discharge Hoses are meant for suction & discharge of petroleum products having aromatic hydrocarbon content below 25%. They are ideal for dock and offshore applications as delivered by numerous Oil Suction Hose Manufacturers.

 

They are provided with first-rate quality of rubber inner lining which is resistant to all types of petroleum and blended products that have aromatic hydrocarbon content maximum up to 25%. The inner lining is essentially smooth in bore, homogeneous in thickness and totally free from air blisters, porosity & splits. Reinforcement of these hoses is given with sturdy plies of rubber impregnated woven textile having helically embedded G.I. wire. A strand of copper wire is planted amidst the reinforcement plies basically to ensure electrical continuity. Its cover is either corrugated or having cloth mark finishes and to safeguard the cover from oil, abrasion and weather, especially selected rubber compound is used.

 

Features

 

Qualitative Rubber Inner Lining

Provided with top-notch rubber lining that’s resistant to petroleum products
Homogenous Inner Lining

Inner lining has smooth bore, homogeneous in thickness & air blister-free
Awesome Hose Reinforcement

Hose Reinforcement is of sturdy rubber plies impregnated with woven textile
Electrical Continuity Assurance

Copper wire strand is fixed in reinforcement plies to confirm electrical continuity
Corrugated Hose Cover

Cover is either corrugated or having cloth mark finishes safeguarding from oil
Inbuilt Flanges

The hoses have inbuilt nipples, flanges or without flanges as tailor-made

 

 

Request
Callback


Additional Information:

  • Delivery Time: Standard Delivery
Yes! I am Interested

Sand/Shot Blasting Rubber Hose (IS : 1677)

Sand/Shot Blasting Rubber Hose (IS : 1677)
  • Sand/Shot Blasting Rubber Hose (IS : 1677)
Ask For Price
Product Price :Get Latest Price

Sand/Shot Blasting Rubber Hoses are meant to convey shots, sand and various other abrasive materials that are utilized in numerous industries. They are industries like steel fabrications, ordnance factories, gas cylinder manufacturing units, heavy engineering industries, manufacturing workshops, etc. Rubber hoses for sand blasting convey such materials at high velocity in all these industries as stated above.

 

DURATUF Hoses have a common requirement in the Sand/Shot Blasting category for wet & dry sand and even grit blasting, suitable for usage up to a maximum working pressure range of 0.7 to 1.0 MPa. Our hose products under this category conform to the IS: 1677:1968 Standards.

 

 

Conforms to the IS: 1677:1968

Duratuf Sand/Shot Blasting Rubber Hoses are available in the following TYPES:

Type

Working Pressure (W.P.)

Bursting Pressure (B.P.)

Type: 1

0.7 MPa

3.5 MPa

Type: 2

1.0 MPa

5.0 MPa


Tensile Strength and Elongation at break of Lining & Cover:


T.S.(Min)

Elongation at break ( Min)

Lining

14 MPa

400%

Cover

10 MPa

300%


Different Bore sizes of DURATUF SAND / SHOT BLASTING HOSE:

DURATUF Sand/Shot Blasting Rubber Hoses are used for:-

 

  • Conveying sand or other abrasive materials at high pressure

  • Sand/Shot blasting purposes within ordnance factories

  • Heavy engineering industries

  • Steel furniture manufacturing workshops



Features

Brilliant Abrasion Resistant Lining

Lining has extra width & smooth bore of abrasion resistant rubber compound
Perfect Reinforcement

These rubber hoses have the reinforcement is of woven textile
Resistant Hose Cover

Cover made of Weather Resistant Natural rubber which is smooth or wrapped
Perfect Mechanical Properties

High tensile strength and excellent abrasion resistance
Copper Wire Reinforcement

Copper wire reinforcement is done to give electrical continuity in the full hose
Standard Adherence

The hoses are also available as per Standard specified in SAE/ISO/DIN etc.

 

 

 

Nom. Bore (mm)

Tolerance on Nom. Bore size

Minimum Thickness of Lining (mm)

Minimum Thickness of cover (mm)

20.0

± 0.75

6.3

1.5

25.0

± 1.25

6.3

1.5

31.5

± 1.25

6.3

1.5

38.0

± 1.50

6.3

1.5

45.0

± 1.50

6.3

1.5

50.0

± 1.50

6.3

1.5

 

Request
Callback


Additional Information:

  • Delivery Time: Standard Delivery
Yes! I am Interested

Water Suction & Discharge Hose (IS: 444)

Water Suction & Discharge Hose (IS: 444)
  • Water Suction & Discharge Hose (IS: 444)
Ask For Price
Product Price :Get Latest Price

Water Suction & Discharge Rubber Hoses conforming to the IS: 444/1987 Type 1, 2, 3A & 3B Standards are generally used for water delivery purpose in numerous sectors. The sectors can be Railways, Industries, dams, Mines, Horticulture, Irrigation, Fire Fighting, Construction Sites, Car Washing, De-watering etc. Water discharge hose suppliers are immensely in demand among all such sectors.

 

 

Conforms to IS: 444/1987 Type 1, 2, 3A, 3B
Different sizes of GENERAL PURPOSE WATER RUBBER HOSE

Nom. Bore (mm)

Tolerance on Nom. Bore (mm)

Minimum Thickness of lining (mm)

Minimum Thickness of Cover for Type 1 & Type 2

Minimum Thickness of Cover for Type 3

10.00

± 0.75

1.50

1.0

1.50

12.50

± 0.75

1.50

1.0

1.50

16.00

± 0.75

1.50

1.0

1.50

20.00

+ 0.75 (-) 1.25

1.50

1.0

1.50

25.00

± 1.25

2.00

1.0

-

31.50

± 1.25

2.00

1.0

-

38.00

± 1.50

2.00

1.0

-

45.00

± 1.50

2.50

1.0

-

50.00

± 1.50

2.50

1.0

-

56.00

± 1.50

2.50

1.0

-

63.00

± 1.50

2.50

1.0

-

75.00

± 2.00

2.50

1.0

-

100.00

± 2.00

2.50

1.0

-


Tensile Strength and Elongation at break of Lining and Cover:

Hose Type

T.S.(minimum)

Elongation at break ( Min)

1

5.0 MPa

250%

2

5.0 MPa

250%

3

7.0 MPa

300%

 

Tolerance on any hose length ± 1%

 

DURATUF Water Suction & Discharge Rubber Hoses are used for:-

 

  • General Construction Work

  • Railways,

  • Industries,

  • Dams,

  • Mines,

  • Horticulture, Construction Sites,

  • Car Washing,

  • Irrigation Projects

  • Garages and Workshops

  • Shipyards

  • De-watering etc.




Features


Perfect Reinforcement

Reinforcement to the hoses is with rubber plies, impregnated woven textile or braided high strength natural/synthetic yarns
Minimum Adhesion Value

Value between Lining/Cover & Reinforcement shall not be less than 1.5Kn/m
Smooth Cover Finish

The cover finish is available with smooth/fluted/cloth mark, free from many visible defects
Good Resistant Nature

They are resistant towards abrasion, oxidation, ozone & weather
Variety of Products

Our hoses confirm to the IS: 444/1987 Type 1, 2, 3A & 3B Standards

 

 

 

Request
Callback
Yes! I am Interested
X

Explore more products



Reach Us
Aayush Kejriwal (Managing Director)
63J, Mahanirban Road, 1st Floor
Kalighat, Kolkata- 700029, West Bengal, India



Call Us

Share Us

F GT L


Send E-mailSend SMS